| This
is SMSCOM
SMSCOM is a GSM-alarm unit
that works with all existing alarmsystems. SMSCOM sends and receives alarm
through the GSM or DCS-network.
SMSCOM is installed in machines,
alarmsystems, controlsystems and sends SMS-messages when alarm is triggered,
or supervision direct to mobilephones.
From the cellphone you can
send SMS to activate functions/remote outputs on the unit.
SMSCOM has 6 inputs and 2
relayoutputs and can measure operating time or pulsecounting. The unit
is programmed from an ordinary mobilephone by sending SMS-commands to SMSCOM.
The unit is perfect for alarm
functions on vehicle, machines, hydraulics, |
 |
alarm
within industry, remote electrical locks, alarm from waterpump stations,
control by fluidlevel in tanks, open/close alarm gates, industrial doors,
coolingsystems, on/off for equipment in vehicles i.e. heater, vehiclealarm
can be sent directly to mobilephones.
The 6 inputs can be programmed
separately. Every input can send userdefined SMS-messages to 3 userselected
telephone numbers.
Inputs can be programmed
to send alarm after a delay time, or after a defined numbers of pulses.
Every input can also be programmed as normally opened (NO) or normally
closed (NC) contact.
The 2 relay outputs can be
programmed separately and each relay can be activated by sending a SMS-messages
to the unit. The relays can be activated, deactivated or just activated
for a specified time. |
